Help Center

Applying Vinyl

VINYL APPLICATION INSTRUCTIONS

Tools Needed:

  • 1 pint of water mixed with 4 drops of baby shampoo (stirred not shaken)
  • Isopropyl alcohol and water 70/30 blend
  • Plastic squeegee
  • Window razor scraper
  • Razor knife
  • Tape measure

 

 

 

 

 

 

 

 

Step 1:  Clean window with isopropyl alcohol and widow razor scraper to remove any dirt.

IMG_1449

 

 

 

 

 

 

 

Step 2: Wipe window with isopropyl alcohol and water mixture one more time to make sure window is thoroughly clean.

IMG_1447

 

 

 

 

 

 

 

Step 3: Spray the window with baby shampoo and water mixture, saturate the entire area. Remove liner on graphic and spray adhesive side with same water mixture. This step may require two people.

IMG_1452

 

 

 

 

 

 

 

Step 4: Apply the graphic to the wet window. The solution allows you to easily adjust the position of the graphic into the right place.

IMG_1453

 

 

 

 

 

 

 

Step 5: Spray surface of graphic to allow your tools to glide easily across the surface.

IMG_1467

 

 

 

 

 

 

 

Step 6: Using firm strokes from the top to bottom, left to right overlapping your strokes. Try to remove as much fluid from graphic as possible.

IMG_1468

 

 

 

 

 

 

 

Step 7: Carefully peel transfer take off the graphic making sure the graphic adheres to the window

IMG_1472

 

 

 

 

 

 

 

Step 8: After thirty minutes re-squeegee the edges

IMG_1477

 

 

 

 

 

 

 

Step 9: Trim graphic 1/8” from rubber seals if necessary. We recommend cutting the graphic to the correct size before installing.

IMG_1479

 

 

 

 

 

 

 

Step 10: back and admire your work!